CO₂ Sensor

CO₂ SENSOR

RY-VS09

MANUAL

INTRODUCTION

The RY-VS09 CO₂ sensor uses a CO₂ probe imported from Sweden, with a wide range and strong antistatic ability. It converts the digital change of carbon dioxide content into analog current, voltage, or MODBUS protocol output for measuring ambient CO₂ concentration.

Widely used in meteorological environment, fresh air system, greenhouse cultivation, breeding, storage, scientific research and other fields.

TECHNICAL SPECIFICATION

●Priciple：NDIR

●Measuring range：0～5000ppm

●Accuracy：±70ppm ±data3%(Start ABC, general application environment, within the range of 0 ~ 2000ppm, the accuracy that can be achieved after 3 weeks of continuous operation）

●Workin voltage： DC12V

●Working current：DC12V <35ma(485) ；DC12V <55ma(current)

●Power Consumption： DC12V <0.42W (485) ；DC12V <0.66W (current)

●Outpur：

●Load capacity：Current mode output impedance≤500Ω

●Standard line length：1.5m

●Farthest lead wire：Current200m、 RS485 100 m

●Working temperature: 0℃～50℃

●Working Humidity：0～100%RH（Sensor is powered）

●Preheating time: < 1 minute

●Ingress Protection：IP65

●Weight：about 200g

●Shell size: 140mm x 30mm

WIRING METHOD

485 output sensor is equipped with a 3m four core cable as standard. Users can customize the cable with appropriate length according to their needs. The cable specification is 0.2mm² Four core shielded cable. The wiring color is defined as

The current output sensor is equipped with a 1.5m three core cable as standard. The user can customize the cable of appropriate length according to the needs. The cable specification is 0.2mm² Three core shielded cable. The wiring color is defined as:

SENSOR SIZE

U CLIP SIZE